Confused between ACE AX-124 and CASE 770NXe ? Wondering whether you should spend that hard earned money on ACE AX-124 and CASE 770NXe? Don't Worry! We are here to help you choose between these two models. Talking about ACE AX-124, it has been priced at Rs ₹23.00 Lakh. On the other hand, CASE 770NXe will cost you more than ACE AX-124. CASE 770NXe comes with a price tag of Rs ₹28.00 Lakh.
Check the detailed comparison for the models below on the basis of features, comfort, power, transmission, suspension and more.
Key Highlights | ACE AX-124 | CASE 770NXe |
---|---|---|
EX-Showroom Price | ₹23.00 Lakh | ₹28.00 Lakh |
Base
₹23.00 Lakh
Base
₹28.00 Lakh
Model | |
KIRLOSKAR 4R1190NA1 | S8000 |
Compliant | |
BS-IV | BS-III |
Air Intake Type | |
NA | Water Cooled |
Gross Power | |
74 hp | NA |
Maximum Torque | |
300 NM | NA |
Dump Height | |
2760 MM | 2720 |
Load Over Height | |
3340 MM | 3300 MM |
Hinge Pin Height | |
NA | 3580 |
Hinge Pin Forward Reach | |
430 | 240 MM |
Reach At Ground | |
1770 MM | 1980 MM |
Max Reach At Full Height Bucket Dumped | |
1220 | 1190 |
Below Ground Level Dig Depth | |
7654 | 110 MM |
Rollback At Ground | |
44 Deg | 33 Deg. |
Dump Angle | |
45 Deg | 45 Deg |
Bucket Capacity Std | |
1.1 | 1.1 |
Loader Arm Breakout Force | |
4950 Kgf | 5110/50.11 (kgf/kN) |
Max Pay Load | |
1900 kg | 1925 kg |
Maximum Lifting Capacity | |
NA | 3425 |
Dipper Configuration | |
NA | 14 Feet |
Max Dig Depth | |
4250 MM | 4400 mm |
Reach Ground Level To Swing Center | |
5500 | 5630 |
Reach Ground Level To Rear Wheel Center | |
NA | 6950 |
Reach At Full Height To Slew Center | |
2780 MM | 2150 |
Max Working Height | |
5470 MM | 5490 |
Max Load Over Height | |
3340 MM | 3640 |
Bucket Capacity | |
0.24 | NA |
Bucket Capacity Backhoe | |
0.2 | 0.26 |
Bucket Rotation | |
175 Degree | 185 Degree |
Bucket Breakout Force | |
NA | 5000/49.03 (kgf/kN) |
Dipper Tear Out Force | |
4000 Kgf | 2751/26.98 (kgf/kN) |
Max Lift Capacity | |
1900 | 1417 Kg |
Safe Working Load | |
1100 kg | 1300 kg |
Max Operating Weight | |
8040 | 7610 |
Transport Length | |
NA | 5880 |
Width Over Stabilizer | |
NA | 2270 MM |
Width Over Bucket | |
2500 MM | 2280 MM |
Track Width Rear | |
1550 MM | 1700 MM |
Track Width Front | |
1840 MM | 1880 MM |
Wheelbase | |
2180 MM | NA |
Minimum Ground Clearance | |
350 MM | 380 MM |
Height To Top Of Cabin | |
NA | 2880 |
Overall Transport Height | |
NA | 3850 |
Pump Type | |
NA | Axial Piston with Electric Displacement Cntrol |
Pump Flow | |
118 IPM | 119 lpm |
Relief Pressure | |
210 Bar | 240 Bar |
Engine Oil | |
11 L | NA |
Rear Axle | |
Front Drive( In Case Of 4 Wd & Steer Axle Centrally Pivoted Rear: Rigid Axle With Carraro Planetary | 17.1 Ltr. |
Hydraulic Oil Replacement | |
NA | 48/4000 hr. |
Fuel Tank | |
150 ltrs | NA |
Hydraulic Oil | |
80 | 100 |
Transmission Oil Capacity | |
17 Ltr | 18 Ltr. |
Rear | |
Rigid axle with CARRARO planetary drive | NA |
Front | |
Drive & Steer Axle, centrally pivoted | NA |
Front Oscillation | |
NA | ±21 degree(2WD) |
Type | |
Hydrostatic steering for reliability and better control | NA |
Unit Displacement | |
NA | 125 CC |
Turning Circle Diameter Outside Bucket | |
NA | 4.6 |
Turning Circle Diameter Outside Bucket Not Braked | |
NA | 5.55 |
Service | |
NA | Hydraulic foot operated, 2 disc per side |
Parking | |
NA | Mechanically actuated caliper type brake pack on rear axle input shaft |
Hd Rear Optional | |
NA | 14x25- 12PR |
Standard Front | |
9.00 x 16 – 16 PR | 9x16 -16PR |
Standard Rear | |
16.90 - 28 - 12 PR | 16.9x28 -12PR |
Battery | |
12 V | 12 volts, 110 Ah |
Transmission Make And Model | |
NA | CARRARO 2WD TLB1 |
Powertrain Type | |
NA | 4F-4R Shuttle Synchromesh Transmission |
Category | |
Backhoe Loader | Backhoe Loader |
Power | |
NA | 49.5 HP |
Forward | |
NA | 5.0/7.9/16.9/32.4 |
Reverse | |
NA | 5.9/9.4/19.8/NR |
Bucket Capacity | |
NA | 1.1 cu.m |
Maximum Torque | |
NA | 252.2 Nm |
Fuel Tank Capacity | |
NA | 129 Ltr |
91Infra is a rapidly growing digital platform that provides the latest updates and detailed information about the infrastructure and construction equipment industry.