Confused between ACE AX-124 and JCB 2DX ? Wondering whether you should spend that hard earned money on ACE AX-124 and JCB 2DX? Don't Worry! We are here to help you choose between these two models. Talking about ACE AX-124, it has been priced at Rs ₹23.00 Lakh. On the other hand, JCB 2DX will cost you more than ACE AX-124. JCB 2DX comes with a price tag of Rs ₹18.00 Lakh.
Check the detailed comparison for the models below on the basis of features, comfort, power, transmission, suspension and more.
| Key Highlights | ACE AX-124 | JCB 2DX | 
|---|---|---|
| EX-Showroom Price | ₹23.00 Lakh | ₹18.00 Lakh | 
Base
₹23.00 Lakh
Base
₹18.00 Lakh
| Model | |
| KIRLOSKAR 4R1190NA1 | KOEL 4R810 | 
| Compliant | |
| BS-IV | BSIII diesel engine | 
| Gross Power | |
| 74 hp | 36.4 kW (49 hp) | 
| Maximum Torque | |
| 300 NM | NA | 
| Dump Height | |
| 2760 MM | 2300 MM | 
| Load Over Height | |
| 3340 MM | 2740 | 
| Hinge Pin Height | |
| NA | 3000 | 
| Hinge Pin Forward Reach | |
| 430 | 370 | 
| Reach At Ground | |
| 1770 MM | 1300 MM | 
| Max Reach At Full Height Bucket Dumped | |
| 1220 | 1120 | 
| Below Ground Level Dig Depth | |
| 7654 | 790 | 
| Rollback At Ground | |
| 44 Deg | 46° | 
| Dump Angle | |
| 45 Deg | 44 Deg. | 
| Bucket Capacity Std | |
| 1.1 | 0.6 | 
| Loader Arm Breakout Force | |
| 4950 Kgf | 1834 kgf | 
| Max Pay Load | |
| 1900 kg | 800 | 
| Maximum Lifting Capacity | |
| NA | 1620 | 
| Max Dig Depth | |
| 4250 MM | 3020 MM | 
| Reach Ground Level To Swing Center | |
| 5500 | NA | 
| Reach Ground Level To Rear Wheel Center | |
| NA | 5140 | 
| Reach At Full Height To Slew Center | |
| 2780 MM | 3930 | 
| Max Working Height | |
| 5470 MM | 3880 | 
| Max Load Over Height | |
| 3340 MM | 2830 | 
| Bucket Capacity | |
| 0.24 | NA | 
| Bucket Capacity Backhoe | |
| 0.2 | NA | 
| Bucket Rotation | |
| 175 Degree | NA | 
| Dipper Tear Out Force | |
| 4000 Kgf | NA | 
| Max Lift Capacity | |
| 1900 | 1490 Kg | 
| Safe Working Load | |
| 1100 kg | NA | 
| Max Operating Weight | |
| 8040 | 5220 | 
| Transport Length | |
| NA | 5500 | 
| Width Over Bucket | |
| 2500 MM | 1912 MM | 
| Track Width Rear | |
| 1550 MM | 1420 Mm | 
| Track Width Front | |
| 1840 MM | 1620 Mm | 
| Wheelbase | |
| 2180 MM | NA | 
| Minimum Ground Clearance | |
| 350 MM | 330 MM | 
| Height To Top Of Cabin | |
| NA | 2070 | 
| Pump Type | |
| NA | Gear, double pump | 
| Pump Flow | |
| 118 IPM | 70.4 lpm @ 2200 rpm | 
| Relief Pressure | |
| 210 Bar | NA | 
| Engine Oil | |
| 11 L | NA | 
| Rear Axle | |
| Front Drive( In Case Of 4 Wd & Steer Axle Centrally Pivoted Rear: Rigid Axle With Carraro Planetary | 10 Ltr | 
| Fuel Tank | |
| 150 ltrs | NA | 
| Hydraulic Oil | |
| 80 | 60 | 
| Transmission Oil Capacity | |
| 17 Ltr | 16 Ltr | 
| Rear | |
| Rigid axle with CARRARO planetary drive | NA | 
| Front | |
| Drive & Steer Axle, centrally pivoted | NA | 
| Type | |
| Hydrostatic steering for reliability and better control | NA | 
| Service | |
| NA | Hydraulically actuated, dual line, self-adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water, etc. Operated through independent pedals linked togeth | 
| Standard Front | |
| 9.00 x 16 – 16 PR | 7.5 x 16 -16 PR | 
| Standard Rear | |
| 16.90 - 28 - 12 PR | 12 x 24 - 20 PR, 14.9 x 24 - 12 PR | 
| Battery | |
| 12 V | NA | 
| Transmission Make And Model | |
| NA | The JCB. SS 700 svncbroshuttle transmission. It consistsof a 4-speed, fully Synchromesh, smooth shift gearbox with integral torque convertor and electrically operated reversing shuttle | 
| Category | |
| Backhoe Loader | Backhoe Loader | 
| Power | |
| NA | 49 HP | 
| Bucket Capacity | |
| NA | 0.60 cu.m | 
| Maximum Torque | |
| NA | 203 Nm |